DS4 DEMA DOORWAY FOAMER - 1 NOZZLE

£1,772.81 Exc. VAT £2,384.01 You Save 25% (£611.20 exc. VAT)

£2,127.37 inc. VAT £2,860.81 You Save 30.0% (£733.44 inc. VAT)

Draws from concentrated product
Dilutes product at ratios of 38:1 to 183:1 (water: chemical)
Repeat cycle timer
Quick-change pump
Supports up to 3 twin-line stainless steel nozzle assemblies
Up to 100 ft (30.5 m) total distance between control box and nozzle(s) (distance does not need to be evenly distributed)
Consistent, reliable dilution rates, regardless of changes in water pressure

Please note: There is a 7 - 10 days delivery on all Dema products.

Scroll down for more information.

Specifications

COMPRESSED AIR REQUIREMENTS	40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
WATER REQUIREMENTS	10-100 psi (0.7-6.9 bar) Backflow prevention is required – consult local plumbing ordinances for more information.
LIQUID TEMPERATURE RANGE	40-100˚F (4.4-37˚C)
ELECTRICAL REQUIREMENTS	120 VAC at 60 Hz, 2 amps (GFCI protected outlet)
OPERATING VOLTAGE	120 VAC
CHEMICAL COMPATIBILITY	Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

POWER TYPE	Compressed air, electricity
CHEMICAL PICKUP TYPE	Draws from concentrated product
DILUTION RATIO RANGE (WATER:CHEMICAL)*	38:1 to 183:1
NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME)	One product
SUCTION LINE LENGTH/DIAMETER	8 ft. (2.4 m) clear hose with 1/4 in. (6.4 mm) inside diameter
FLOW RATE*	2 gal/min (7.6 l/min)
PUMP SEALS	Santoprene, Viton, or Kalrez
TIMER OPERATION TYPE	Repeat cycle
COVERAGE AREA	One nozzle: up to 9x5 ft. (2.7x1.5 m); Two nozzles: up to 8x4 ft. (2.4x1.2 m) at each nozzle; Three nozzles: up to 6x3 ft. (1.8x0.9 m) at each nozzle
FAN TIP	One nozzle: ST80200; Two nozzles: ST80100; Three nozzles: ST8060-1/2
NOZZLE TYPE	Twin-line stainless steel nozzle assembly (GK7T)
NUMBER OF NOZZLES	One control box can support up to three nozzle assemblies
DISTANCE FROM NOZZLES TO CONTROL BOX	The combined distance between the control box and the nozzle(s) must equal 100 ft. (30.5 m) or less
TUBING/FITTING SIZES	Designed for use with 1/2 in. (12.7 mm) outside diameter tubing between control box and nozzle(s)

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

Add bold option codes to item number as shown. For standard options, no option code is needed. Examples: