Replacements made easy and cost efficient!
There are many reasons for the need to replacing an old ozone generator. Age, failure or changes in water quality or water flow. The challenge is then finding a new ozone generator that fits the current solution. Primozone offers cost efficient, solution through a Buy Back-concept.
The unique features of the Primozone ozone generator technology provides new possibilities when it comes to replacing an old ozone generator. The high ozone concentration (up to 20 wt%), the high gas pressure (up to 4 bar/58 psi), the small footprint and modular design enables easy replacement and the opportunity to prepare for future improvements.
Space is always a challenge when replacing an old ozone generator with a new. With the modular Primozone ozone generators this is no longer a problem as the footprint is often more than 50% smaller that existing ozone generators.
Simply a forklift is necessaryto place the Primozone ozone generator modules in position. There is no need to lift of any roofs or change the building.
Securing up-time is important when replacing ozone generators and thanks to the small footprint of Primozone ozone technology it can often be installed next to the old generator before it is removed.
Ease of installation and start-upis another factor that secures the up-time. A Primozone ozone generator is easy to install, start-up and operate.
Fitting the existing ozone system is often the biggest challenge. With the Primozone ozone generators there is often no need to do other than small amendments to the existing peripheral equipment.
The existing oxygen sourcewhether consisting of a PSA oxygen generator or LOX will have enough capacity and do often not need replacing.
High ozone concentration means savings in oxygen.
The current dissolutlon systemsand ozone destructors do often do not need replacing thanks to the low gas flow created by the high ozone concentration. But an upgrade will improve performance.
Adding ozone capacity to an existing system easy. Thanks to the small footprint a Primozone ozone generator will fit in almost any location. If the existing ozone system is not dimensioned to manage the increased ozone capacity a complete system can be added using a containerized solution.