PRIMOZONE COOLING SKID MODULE (CSM)

PRIMOZONE COOLING SKID MODULE (CSM)

Primozone GM-ozone generators are water cooled ozone generators. In order to maintain the highest performance of your Primozone GM-ozone generator and to ensure continuous operations, it is important to cool the ozone generator with cooling water.

Primozone cooling skid module (CSM) makes it possible to use local available process water (Sea or Fresh Water) as the cooling water in a very energy efficient way, as it separates the process water loop from the ozone generator loop. Therefore, if cooling water is available on site, the Primozone CSM with heat exchanger and circulation pumps, are normally the preferred solution. The process water must be at a  temperature between +3° and +20°C (37-68°F) and have a sufficient flow.

The Primozone CSM is equipped with a heat exchanger, either in stainless steel (SS) for fresh water or titanium for sea water (TI), and an expansion tank. The CSM makes a closed loop, with the ozone generator(s) on one side and the cooling water on the other, to prevent any dirty water contamination. Therefore, mitigating the risk of damage to the ozone generator. 

The Primozone CSM is available in a single pump or a dual pump configuration. The dual pump configuration safeguards your equipment by alternating the pumps for a safer installation.

Note: the cooling water temperature will affect the produced amount of ozone. Optimum cooling water temperature is 10°C (50°F).

Primozone offer larger capacity of cooling skids on request.

• Most energy efficient solution
• Cost effective
• Fresh water (SS) or sea water (TI)
• Closed loop cooling
• Safeguarding investment.
• Single pump or dual pump
• The Primozone CSM is available in three different sizes.

Please enquire for more information.