DOSATRON D3TRE Dosing Pump Chemical Injector unit

NEW HIGH TEMPERATURE MODELS 

70 DEGREE CELSIUS MAXIMUM OPERATING TEMPERATURE.

The D3TRE Dosatron unit, the easy to use, alternative to manual chemical dosing.

The D3RE is installed directly in the water supply line and works by using the flow of water as the power source. The flow of water activates the Dosatron unit to draw the required percentage of concentrated chemical from the chemical container and injects it into the water stream. The concentrated chemical is then mixed with the water stream, and the water pressure forces the solution downstream, providing the end user with a diluted solution ready to use.

The D3TRE is available in PVDF White with standard injection options:

D3RE5 Flow Rate 100-3000 litres per hour at 0.5-5% Dose Rate Range - Standard Injection

D3RE10 Flow Rate 100-3000 litres per hour at 1-10% Dose Rate Range - Standard Injection.

D3RE3000 Flow Rate 500-8000 litres per hour at 0.03-0.125 % Dose Range - Standard Injection

Check out the videos -For more information on the operation of the Dosatron Units

For more information on the full range please enquire.

When Ordering a DOSATRON unit please provide SOS Hygiene with the information on the chemical that will be used in the Dosatron, preferably send the safety data sheet. SOS will need to check the seals in your chosen Dosatron are compatible for your chemical.

AF Seals - typically used with high PH additives, with some exceptions

VF Seals - typically used with low PH additives, with some exceptions.