DOSATRON D45RE Dosing Pump Chemical Injection Unit

The D45RE Dosatron unit, the easy to use, alternative to manual chemical dosing.

The D45RE is installed directly in the water supply line and works by using the flow of water as the power source. The flow of water activates the Dosatron unit to draw the required percentage of concentrated chemical from the chemical container and injects it into the water stream. The concentrated chemical is then mixed with the water stream, and the water pressure forces the solution downstream, providing the end user with a diluted solution ready to use.

The D45RE is available in a selection of models in a choice of Blue Body or PVDF White with standard and external injection options:

D45RE3000 Flow Rate 100-4,500 litres per hour at 0.033 -0.1 % Dose Rate Range - Standard injection 

D45RE1.5 Flow Rate 100-4,500 litres per hour at 0.2-1.5% Dose Rate Range - Standard Injection & External Injection

D45RE3 Flow Rate 100-4,500 litres per hour at 0.5-3% Dose Rate Range - Standard Injection & External Injection

D45RE8 Flow Rate 100-4,500 litres per hour at 3-8% Dose Rate Range - Standard Injection & External Injection

Check out the videos -For more information on the operation of the Dosatron Units

For more information on the full range please enquire.

When Ordering a DOSATRON unit please provide SOS Hygiene with the information on the chemical that will be used in the Dosatron, preferably send the safety data sheet. SOS will need to check the seals in your chosen Dosatron are compatible for your chemical.

AF Seals - typically used with high PH additives, with some exceptions

VF Seals - typically used with low PH additives, with some exceptions.