FI-WC-SS-E

DEMA WALL MOUNTED CONCENTRATE FOAMER

  • Draws from concentrated product
  • Dilutes at ratios of 14:1 to 320:1
  • Powered by compressed air
  • Stainless steel ball valve and wand
  • Stainless steel fluid fittings
  • Quick-change pump
  • Colour coding options:
    • Discharge hose – 4 colours (BL, GN, YL, RD)
  • Consistent, reliable dilution rates, regardless of changes in water pressure
Scroll down for more information.

Specifications

Downloads

Videos


COMPRESSED AIR REQUIREMENTS40-80 psi (3-5 bar) with 5-10 cfm (141-283 l/min)
WATER REQUIREMENTS10-100 psi (0.69-6.9 bar)
Backflow prevention is required – consult local plumbing ordinances for more information.
LIQUID TEMPERATURE RANGE40-100˚F (4.4-37˚C)
CHEMICAL COMPATIBILITYChemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
POWER TYPECompressed air
CHEMICAL PICKUP TYPEDraws from concentrated product
DILUTION RATIO RANGE (WATER:CHEMICAL)*14:1 to 320:1
NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME)One product
SUCTION LINE LENGTH/DIAMETER8 ft. (2.4 m) clear hose with 1/4 in. (6.4 mm) inside diameter
DISCHARGE HOSE DIAMETER/LENGTH50 ft. (15 m) hose, with 3/4 in. (19 mm) inside diameter)
DISCHARGE WAND/TIP TYPE7 in. (17.8 cm) stainless steel wand with zero tip and ball valve
OUTPUT DISTANCE25-30 ft. (7-9 m)
OUTPUT VOLUME20-45 gal/min (75-170 l/min) of foam
FLOW RATE*2 gal/min (7.6 l/min))
PUMP SEALSSantoprene, Viton, or Kalrez

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

Hire DEMA WALL MOUNTED CONCENTRATE FOAMER

Please send us your enquiries via the following email form.

Enquire About DEMA WALL MOUNTED CONCENTRATE FOAMER

Subscribe