D25RE2 - BLUE BODY
The D25RE Dosatron unit, the easy to use, alternative to manual chemical dosing.
The D25RE is installed directly in the water supply line and works by using the flow of water as the power source. The flow of water activates the Dosatron unit to draw the required percentage of concentrated chemical from the chemical container and injects it into the water stream. The concentrated chemical is then mixed with the water stream, and the water pressure forces the solution downstream, providing the end user with a diluted solution ready to use.
All D25RE come with standard injection not external injection.
The D25RE is available in six models in a choice of Blue Body or PVDF White:
D25RE2 Flow Rate 10-2,500 litres per hour at 0.2 -2 % Dose Rate Range
D25RE5 Flow Rate 10-2,500 litres per hour at 1-5% Dose Rate Range
D25RE10 Flow Rate 10- 2,000 litre per hour at 3-10% Dose Rate Range
Check out the videos -For more information on the operation of the Dosatron Units
For more information on the full range please enquire.
When Ordering a DOSATRON unit please provide SOS Hygiene with the information on the chemical that will be used in the Dosatron, preferably send the safety data sheet. SOS will need to check the seals in your chosen Dosatron are compatible for your chemical.
AF Seals - typically used with high PH additives, with some exceptions
VF Seals - typically used with low PH additives, with some exceptions.
Please send us your enquiries via the following email form.