DEMA - FI.BP.15N - BATTERY FOAM UNIT 60L

£2,607.04 Exc. VAT £3,480.68 You Save 25% (£873.64 exc. VAT)

£3,128.45 inc. VAT £4,176.82 You Save 30.0% (£1,048.37 inc. VAT)

DEMA - FI.BP.15N - BATTERY FOAM UNIT 60L

DEMA 60 Litres Battery Foam Unit.

It comes as:

Please note: There is a 7 - 10 days delivery on all Dema products.

Scroll down for more information.

Further Information

LIQUID TEMPERATURE RANGE	40-100˚F (4.4-37˚C)
ELECTRICAL REQUIREMENTS	120 VAC at 60 Hz, 2 amps (GFCI protected outlet) for battery charger only
OPERATING VOLTAGE	12 VDC
CHEMICAL COMPATIBILITY	Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
BATTERY CHARGE TIME (FROM FULL DEPLETION)	7.5 hours
BATTERY RUN TIME (FROM FULL CHARGE)	Up to 2 hours of non-continuous run time
CHEMICAL PICKUP TYPE	Draws from pre-mixed solution
NUMBER OF PRODUCTS UNIT CAN DRAW FROM	One product
SUCTION LINE LENGTH/DIAMETER	3/8 in. (9.5 mm) inside diameter
CAPACITY	15 gallons (56.78 liters)
DISCHARGE HOSE DIAMETER/LENGTH	15 ft. (4.6 m) hose, with 1/2 in. (12.7 mm) inside diameter)
DISCHARGE WAND/TIP TYPE	Stainless steel wand with 65° fan tip and ball valve
OUTPUT DISTANCE	5-6 ft. (1.52-1.83 m)
OUTPUT VOLUME	4-5 gal/min (15-18.93 l/min) of foam
FLOW RATE*	2 gal/min (7.6 l/min)
PUMP SEALS	Santoprene or Viton
WHEEL TYPE	2 x 10” non-marking wheels

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.