FI-BP-15N

DEMA BATTERY FOAM UNIT 60L (FI.BP-15N)

FI.BP-15N

DEMA 60 Litres Battery Foam Unit.

It comes as:

  • FI-BP-15NE (standard unit with Santoprene pump seals
  • FI-BP-15NVE (unit with Viton pump seals)
Scroll down for more information.
Type
Enquire View Full Details & Make An Enquiry

Further Information

Specifications

Downloads

Videos

  • Draws from pre-mixed solution
  • Battery-powered – no air lines or power cords to hold you back
  • Up to 2 hours of non-continuous run time from one charge
  • Easy-to-read battery level indicator on back plate
  • Designed for easy charging and maintenance
  • Ideal for drain foaming, spot cleaning, and more
  • Optimized for use with low-foaming chemical products
  • Produces a lower volume of foam than our air-operated units
  • Natural colour tank for easy visibility of product levels
  • Hinged lid
  • Integrated hose wraps
  • In-line strainer to protect pump from debris

 

LIQUID TEMPERATURE RANGE

40-100˚F (4.4-37˚C)

ELECTRICAL REQUIREMENTS

120 VAC at 60 Hz, 2 amps (GFCI protected outlet) for battery charger only

OPERATING VOLTAGE

12 VDC

CHEMICAL COMPATIBILITY

Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

BATTERY CHARGE TIME (FROM FULL DEPLETION)

7.5 hours

BATTERY RUN TIME (FROM FULL CHARGE)

Up to 2 hours of non-continuous run time

CHEMICAL PICKUP TYPE

Draws from pre-mixed solution

NUMBER OF PRODUCTS UNIT CAN DRAW FROM

One product

SUCTION LINE LENGTH/DIAMETER

3/8 in. (9.5 mm) inside diameter

CAPACITY

15 gallons (56.78 liters)

DISCHARGE HOSE DIAMETER/LENGTH

15 ft. (4.6 m) hose, with 1/2 in. (12.7 mm) inside diameter)

DISCHARGE WAND/TIP TYPE

Stainless steel wand with 65° fan tip and ball valve

OUTPUT DISTANCE

5-6 ft. (1.52-1.83 m)

OUTPUT VOLUME

4-5 gal/min (15-18.93 l/min) of foam

FLOW RATE*

2 gal/min (7.6 l/min)

PUMP SEALS

Santoprene or Viton

WHEEL TYPE

2 x 10” non-marking wheels


*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

Hire DEMA BATTERY FOAM UNIT 60L (FI.BP-15N)

Please send us your enquiries via the following email form.

Enquire About DEMA BATTERY FOAM UNIT 60L (FI.BP-15N)

Subscribe