Sale

FI-10N-B

DEMA - FI-10N-BE - BATTERY FOAM UNIT 40L

DEMA - FI-10N-BE - BATTERY FOAM UNIT 40L

DEMA 40 Litres Battery Foam Unit with Polypropylene Trigger Handle.

It comes as:

  • FI-10N-BE (standard unit with Santoprene pump seals)   
  • FI-10NV-BE (unit with Viton pump seals) for use with oxidising agents 

Please note: There is a 7 - 10 days delivery on all Dema products.         

    Scroll down for more information.
    Enquire View Full Details & Make An Enquiry

    Further Information

    Specifications

    Downloads

    • Draws from pre-mixed solution
    • Battery operated
    • Up to 45 minutes of continuous use from one charge
    • Trigger gun handle with foam fan tip
    • Hinged back plate provides tool-free access to components
    • Natural colour tank for easy visibility of product levels
    • Hinged lid
    • Integrated hose wraps
    • Front-facing drain

     

    LIQUID TEMPERATURE RANGE

    40-100˚F (4.4-37˚C)

    ELECTRICAL REQUIREMENTS

    120 VAC at 60 Hz, 1 amp (GFCI protected outlet) for battery charger only

    OPERATING VOLTAGE

    12 VDC

    CHEMICAL COMPATIBILITY

    Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

    POWER TYPE

    Battery

    BATTERY CHARGE TIME (FROM FULL DEPLETION)

    8 hours

    BATTERY RUN TIME (FROM FULL CHARGE)

    45 minutes of continuous use

    CHEMICAL PICKUP TYPE

    Draws from pre-mixed solution

    NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME)

    One product

    SUCTION LINE LENGTH/DIAMETER

    3/8 in. (9.5 mm) inside diameter)

    CAPACITY

    12.5 gallons (47.32 Litres)

    DISCHARGE HOSE DIAMETER/LENGTH

    12 ft. (3.66 m) hose, with 3/8 in. (9.5 mm) inside diameter

    DISCHARGE WAND/TIP TYPE

    Polypropylene trigger handle with 50˚ fan tip

    OUTPUT DISTANCE

    5-6 ft. (1.52-1.83 m)

    OUTPUT VOLUME

    4-5 gal/min (15-18.93 l/min) of foam

    FLOW RATE*

    Up to 1 gal/min (3.8 l/min)

    PUMP SEALS

    Santoprene or Viton

    WHEEL TYPE

    2 x 10” non-marking wheels

     

    *Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

    Hire DEMA - FI-10N-BE - BATTERY FOAM UNIT 40L

    Please send us your enquiries via the following email form.

    Enquire About DEMA - FI-10N-BE - BATTERY FOAM UNIT 40L

    Subscribe