DEMA - FI-10N-BE - BATTERY FOAM UNIT 40L
DEMA 40 Litres Battery Foam Unit with Polypropylene Trigger Handle.
It comes as:
Please note: There is a 7 - 10 days delivery on all Dema products.
LIQUID TEMPERATURE RANGE
120 VAC at 60 Hz, 1 amp (GFCI protected outlet) for battery charger only
Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
BATTERY CHARGE TIME (FROM FULL DEPLETION)
BATTERY RUN TIME (FROM FULL CHARGE)
45 minutes of continuous use
CHEMICAL PICKUP TYPE
Draws from pre-mixed solution
NUMBER OF PRODUCTS UNIT CAN DRAW FROM (AND WHETHER IT DRAWS SIMULTANEOUSLY OR ONE AT A TIME)
SUCTION LINE LENGTH/DIAMETER
3/8 in. (9.5 mm) inside diameter)
12.5 gallons (47.32 Litres)
DISCHARGE HOSE DIAMETER/LENGTH
12 ft. (3.66 m) hose, with 3/8 in. (9.5 mm) inside diameter
DISCHARGE WAND/TIP TYPE
Polypropylene trigger handle with 50˚ fan tip
5-6 ft. (1.52-1.83 m)
4-5 gal/min (15-18.93 l/min) of foam
Up to 1 gal/min (3.8 l/min)
Santoprene or Viton
2 x 10” non-marking wheels
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
Please send us your enquiries via the following email form.